Yamaha RX-V359 Owner's Manual - Page 28
The Roxy Thtr, Press PROGRAM
View all Yamaha RX-V359 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
PLAYBACK 5 Rotate VOLUME on the front panel (or press VOLUME +/- on the remote control) to adjust the volume to the desired output level. VOLUME + or VOLUME - 7 Press PROGRAM l / h on the front panel repeatedly (or press one of the sound field program selector buttons on the remote control repeatedly) to select the desired sound field program. The name of the selected sound field program appears in the front panel display. See page 31 for details about sound field programs. l PROGRAM h Note If you connected a recording component to the VCR OUT, or MD/CD-R OUT (REC) jacks, and you notice distortion or low volume during playback from other components, try turning on the recording component. 6 Press TONE CONTROL on the front panel repeatedly to select "BASS" or "TREBLE" and then press BASS/TREBLE +/- to adjust the corresponding frequency response level. Front panel or 2CH STEREO 1 MUSIC ENTERTAIN MOVIE 2 3 4 STANDARD 5 5CH STEREO 6 7 8 A SPEAKERS B 9 0 NIGHT STRAIGHT +10 ENT. Remote control TONE CONTROL BASS/TREBLE • Select "BASS" to adjust the low-frequency response. • Select "TREBLE" to adjust the high-frequency response. Notes • Speaker and headphone adjustments are stored independently. • When "TONE BYPASS" (see page 55) is set to "AUTO", and "BASS" and "TREBLE" are set to 0 dB, audio output automatically bypasses the tone control circuitry of this unit. • If you increase or decrease the high-frequency or lowfrequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. • TONE CONTROL is not effective when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 25). The Roxy Thtr Currently selected surround field program Notes • Choose a sound field program based on your listening preference, not merely on the name of the program. • When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source. • Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 25). • When sampling frequencies higher than 48 kHz are input, this unit is automatically set to the "STEREO" mode. • To display information about the currently selected input source in the front panel display, see page 28 for details. 24