Yamaha RX-V359 Owner's Manual - Page 30
Selecting the input modes, Adjusting speaker levels during, playback, Press INPUT
View all Yamaha RX-V359 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
PLAYBACK ■ Selecting the input modes This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use. y • We recommend setting "INPUT MODE" to "AUTO" in most cases. • You can adjust the default input mode of this unit by using the "INPUT MODE" parameter in "INPUT MENU" (see page 55). Notes • To play DTS-encoded CDs when using a digital audio connection, be sure to set "INPUT MODE" to "DTS". • Depending on the player, DTS decoding may not be performed correctly even if you make a digital connection between this unit and the player. 1 Press INPUT l / h on the front panel to select the desired input source. INPUT 2 Press INPUT MODE on the front panel repeatedly to select the desired input mode. INPUT MODE ■ Adjusting speaker levels during playback You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks. 1 Press AMP on the remote control and then press LEVEL repeatedly to select the speaker you want to adjust. AMP LEVEL TITLE BAND • Select "FRONT L" to adjust the front left speaker output level. • Select "CENTER" to adjust the center speaker output level. • Select "FRONT R" to adjust the front right speaker output level. • Select "SUR. R" to adjust the surround right speaker output level. • Select "SUR. L" to adjust the surround left speaker output level. • Select "SWFR" to adjust the subwoofer output level. y Once you press LEVEL on the remote control, you can also select the speaker by pressing u / d. Currently selected input sources 2 Press j / i on the remote control to adjust the speaker output level. VCR V-AUX DTV/CBL DVD MD/CD-R TUNER CD DVD AUTO Currently selected input source Currently selected input mode AUTO DTS ANALOG Automatically selects input signals in the following order: 1) Digital signals 2) Analog signals Selects only digital signals encoded in DTS. If no DTS signals are input, no sound is output. Selects only analog signals. If no analog signals are input, no sound is output. Note When "INPUT MODE" is set to "AUTO", this unit automatically switches to the appropriate decoder if a Dolby Digital or DTS signal is detected. - ENTER + A-E/CAT. PRESET/CH The control range is from +10 dB to -10 dB for the center and surround speakers, and from 0 dB to -20 dB for the front speakers and subwoofer. Notes • This operation will override the level adjustments made in "SETUP" (see page 20). • You cannot adjust speaker levels if "SPEAKER SET" in "SOUND MENU" (see page 53) is set to "NONE". • You cannot adjust the subwoofer level if "BASS" in "SPEAKER SET" (see page 53) in the set menu is set to "FRNT". • If you use LEVEL to adjust speaker levels, the speaker levels you previously set with the test tone will also change. • If you select "SETUP" (see page 20) and then select "SET", speaker levels change in response to any changes you make in "SETUP". 26