Yamaha TSX-20 Owners Manual - Page 23
Optional settings for, RDS functions
View all Yamaha TSX-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Optional settings for RDS functions The tuner has the following functions which make use of the RDS data service. These are originally in operation ON. However, you can turn these functions OFF, if so desired. PTY SEEK MODE FREQ/RDS SLEEP STANDBY/ON B. BOOST BASS/TREBLE LEVEL FREQ/RDS PRESET RTY SEEK MODE START TUNER ABCDE PRESET REP RANDOM INPUT TIME MUTE VOL DISPLAY PTY SEEK START DISPLAY RECEIVING RDS STATIONS • If you receive an RDS station of some other country, the built-in clock is synchronized with the time setting of that country. • If the built-in clock is not yet set for the current deftsime or was reset due to a power failure, etc., it will be set for the time of the CT data automatically, whether this setting is ON or OFF. 2. LOCAL = CT (ON/OFF) If the RDS station being received employs the local time (daylight savings time, etc.) data service, its time is displayed in the CT mode. GettPilnagyiSntgarCtDeds 3. A.M. = RDS (ON/OFF) RDS stations are searched instead of all FM stations by the automatic preset tuning operation when the setting is ON. (Refer to page 10.) 4. RT SPEED: ±0 Changes the scrolling speed of radio text. Increase the value to increase the speed, and decrease the value to reduce the speed. English 1 Select the FM band. (Refer to page 17.) 2 Press DISPLAY to display the current time. 3 Press FREQ/RDS. 4 Each time you press PTY SEEK MODE the display will change as follows: 1. CT = CLOCK (ON/OFF) The tuner corrects the time of the built-in clock automatically by synchronizing it with the CT data from the RDS station being received. Control Range: ±0 to ±3 (Preset value: ±0) 5 Choose the ON or OFF function by pressing PTY SEEK START and confirming it in the display. Press PTY SEEK START repeatedly to change the value for RT SPEED. • If there is no operation for about 20 seconds, this mode is cancelled and the frequency display returns. If the station is broadcasting PS data, it switches to the PS mode. 6 Press FREQ/RDS again to restore the frequency display mode. 21