Yamaha ZG02 ZG02 User Guide - Page 15
Connecting, Protection of copyright
View all Yamaha ZG02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connections > Connection example Connecting ( Connect the [USB (CONSOLE) [ ]] port of the ZG02 to the USB port of your home gaming device with a commercially available USB 2.0 cable (Type-C to Type-A). ( Connect the [USB (PC) [ ]] port of the ZG02 to the USB port on your computer with the included USB 2.0 cable. ( Connect the condenser mic to the [MIC IN] jack on the rear panel. ( Connect your headphones to the [PHONES] jack. Protection of copyright Observe the following precautions when distributing content via livestreaming. ( Do not use this product for any purpose that may infringe upon the rights of any third party including copyrights, as established by law in each country or region. ( Yamaha bears no responsibility for any infringement upon third party rights that may occur as a result of using this product. NOTE ( When connecting a condenser mic, make sure that the ZG02 is turned on, and hold down the phantom [48V] button to turn phantom power on. (p.10) ( Do not connect anything to the [MIC IN] jack on the front panel when you have already connected a mic to the [MIC IN] jack on the rear panel. If mics are connected to both jacks, the [MIC IN] jack on the front panel will be given priority. ( You will need to install the Yamaha ZG Controller on your computer for this. (p.16) ( The [USB (PC) [ ]] port can be used to output the livestreaming audio. ( If your computer or home gaming device uses a Type-C USB port, use a commercially available Type-C cable (Type-C to Type-C) to connect. 15