ZyXEL P-964 User Guide - Page 33
x, WPA-PSK, Apply, MAC Restrict Mode, MAC Addresses, Connected Clients
View all ZyXEL P-964 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
P964 APR Cable Router with 802.11g Access Point "802.1x": There must be a RADIUS server when use this setting. 802.11b/g client devices must have a relative setting for this option. It is also required to set the correct "PassPhrase" on RADIUS server while connecting with P964 APR. "WPA": This option has the same requirement to set the RADIUS server. 802.11b/g client devices must support WPA option to connect with P964 APR. "WPA-PSK": The RADIUS server is not required, but the "WPA Pre-Shared Key" must be set. In order to connect with P964 APR, 802.11b/g client devices must support WPA option. The P964 APR also has a "WPA Group Rekey Interval" setting, the unit is in seconds, It is a function for WPA key changeing periodically by setting the interval. Click "Apply" to Save all change. Figure 3-11 Web Management - Wireless: Security The "802.11b/g Access Control" allows user to configure the Access Control of the AP and the connected clients. "MAC Restrict Mode": The restrict mode can be set as 'Allow' or 'Deny' to allow or deny access client to connect the P964 APR. Choose 'Disabled' without any restrictions. "MAC Addresses": MAC Addresses to 'Deny' or 'Allow' Click "Apply" to Save all change. "Connected Clients": Show the current connecting CPEs. Web Based Management 3-11