ZyXEL VSG1432-B101 Quick Start Guide - Page 7
a. DSL WAN, b. ETHERNET WAN, POWER, ETHERNET, then stays on once it is ready.
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
VSG1432-B101 Series 2. Do one of the following for your Internet connection: a. DSL WAN: Use a telephone cable to connect your VSG1432B101's DSL port to a telephone jack (or the DSL or modem jack on a splitter if you have one). b. ETHERNET WAN: If you already have a broadband router or modem, use an Ethernet cable to connect the ETHERNET WAN port to it for Internet access. 3. LAN: Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet access. 4. USB: Connect a USB (version 2.0 or lower) memory stick or a USB hard drive for file sharing. Use a USB extension cable if the stick is too big to fit. 5. POWER: Use the provided power adaptor to connect the POWER socket to an appropriate power source. Make sure the power at the outlet is on. After connecting the power adaptor, look at the lights on the front panel. • The POWER light blinks while your VSG1432-B101 starts up and then stays on once it is ready. • Each LAN light stays on if the corresponding LAN port is properly connected and blinks when there is traffic. • The ETHERNET WAN light stays on if the ETHERNET WAN port is properly connected and blinks when there is traffic. • The USB light turns on when your VSG1432-B101 detects a connected USB device. • The DSL WAN light turns on when your VSG1432-B101 has a DSL connection. 7