ZyXEL ZyWALL USG 300 User Guide - Page 230
Dashboard continued
View all ZyXEL ZyWALL USG 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
Chapter 9 Dashboard Table 22 Dashboard (continued) LABEL DESCRIPTION IP Address This field displays the current IP address assigned to the interface. If the IP address is 0.0.0.0, the interface is disabled or did not receive an IP address and subnet mask via DHCP. Action If this interface is a member of an active virtual router, this field displays the IP address it is currently using. This is either the static IP address of the interface (if it is the master) or the management IP address (if it is a backup). Use this field to get or to update the IP address for the interface. Click Renew to send a new DHCP request to a DHCP server. Click the Connect icon to have the ZyWALL try to connect a PPPoE/PPTP interface or the auxiliary interface. If the interface cannot use one of these ways to get or to update its IP address, this field displays n/a. Extension Slot Slot Device Click the Disconnect icon to stop a PPPoE/PPTP or auxiliary interface's connection. This section displays extension card slot and USB port status. This field displays the name of each extension slot. This field displays the name of the device connected to the extension slot (or none if no device is detected). Status USB Flash Drive - Indicates a connected USB storage device and the drive's storage capacity. The status for an installed WLAN card is none. For cellular (3G) interfaces, see Section 10.11 on page 258 for the status that can appear. Ready - A USB storage device connected to the ZyWALL is ready for the ZyWALL to use. Unused - The ZyWALL is unable to mount a USB storage device connected to the ZyWALL. System Status System Uptime This field displays how long the ZyWALL has been running since it last restarted or was turned on. Current This field displays the current date and time in the ZyWALL. The format Date/Time is yyyy-mm-dd hh:mm:ss. VPN Status Click this to look at the VPN tunnels that are currently established. See Section 9.2.1 on page 232. DHCP Table Click this to look at the IP addresses currently assigned to the ZyWALL's DHCP clients and the IP addresses reserved for specific MAC addresses. See Section 9.2.5 on page 235. Current Login User This field displays the user name used to log in to the current session, the amount of reauthentication time remaining, and the amount of lease time remaining. See Chapter 40 on page 731. Number of This field displays the number of users currently logged in to the Login Users ZyWALL. Click the icon to pop-open a list of the users who are currently logged in to the ZyWALL. See Section 9.2.6 on page 236. 230 ZyWALL USG 300 User's Guide