ZyXEL ZyWALL USG 300 User Guide - Page 97

Chapter 6 Configuration Basics • The WAN zone contains the ge2 and ge3 interfaces (physical ports 2 and 3). They use public IP addresses to connect to the Internet. • The DMZ zone contains the ge4 and ge5 interfaces (physical ports 4 and 5). The DMZ zone has servers that are available to the public. These interface uses private IP addresses 192.168.2.1 and 192.168.3.1. • The WLAN zone contains the ge6 interface (physical port P6). This is a second protected zone for connecting wireless access points. The ge6 interface uses private IP address 10.59.0.1 and the connected devices use IP addresses in the 10.59.0.2 to 10.59.0.254 range. • Interface ge7 (physical port 7) is not part of a zone by default. Add it to a zone to apply security policies. 6.3 Terminology in the ZyWALL This section highlights some differences in terminology or organization between the ZLD-based ZyWALL and other routers, particularly ZyNOS routers. Table 15 ZLD ZyWALL Terminology That is Different Than ZyNOS ZYNOS FEATURE / TERM ZLD ZYWALL FEATURE / TERM IP alias Virtual interface Gateway policy VPN gateway Network policy (IPSec SA) VPN connection Hub-and-spoke VPN (VPN) concentrator Table 16 ZLD ZyWALL Terminology That Might Be Different Than Other Products FEATURE / TERM ZLD ZYWALL FEATURE / TERM Source NAT (SNAT) Policy route Table 17 NAT: Differences Between ZLD ZyWALL and ZyNOS ZYNOS FEATURE / SCREEN ZLD ZYWALL FEATURE / SCREEN Trigger port, port triggering Policy route Address mapping Policy route Address mapping (VPN) IPSec VPN Table 18 Bandwidth Management: Differences Between the ZLD ZyWALL and ZyNOS ZYNOS FEATURE / SCREEN ZLD ZYWALL FEATURE / SCREEN Interface bandwidth management (outbound) Interface OSI level-7 bandwidth management Application patrol General bandwidth management Policy route ZyWALL USG 300 User's Guide 97