ZyXEL ZyWALL USG 300 User Guide - Page 331
Table 71
View all ZyXEL ZyWALL USG 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
Chapter 13 Interfaces The following table describes the general wireless LAN labels in this screen. Table 71 Configuration > Network > Interface > WLAN > Add (No Security) LABEL DESCRIPTION Show Advance Click this button to display a greater or lesser number of configuration Settings / Hide fields. Advance Settings General Settings Enable Interface Select this option to turn on the wireless LAN interface. Interface Name When you are adding a wireless LAN interface, edit the last number (using 1~8) of the name for this wireless LAN interface. Description Enter a description of this interface. It is not used elsewhere. You can use alphanumeric and characters, and it can be up to 60 characters long. Zone Select the zone to which you want the WLAN interface to belong. Virtual Access Point Settings SSID (Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. To make your wireless network more secure, change the default SSID to something that is difficult to guess. Hide SSID Broadcast Select to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning. Block Intra BSS Traffic Select this to prevent wireless clients in this profile's BSS from communicating with one another. Maximum Associations Specify the highest number of wireless clients that are allowed to connect to the wireless interface at the same time. WLAN Security Settings Security Type Use this field to select the type of security to use for this wireless LAN interface. Select none to not use any security. See the following sections for details on the other security types. 802.1x Authentication server (IEEE 802.1x) settings are available when you use no security or WEP security and click Advanced. Radius Server IP Address Radius Server Port Radius Server Secret IP Address Assignment Select the check box to enable wireless user authentication through an external authentication server. Enter the IP address of the external authentication server in dotted decimal notation. Enter the RADIUS server's listening port number (the default is 1812). Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external authentication server and the ZyWALL. The key is not sent over the network. This key must be the same on the external authentication server and ZyWALL. ZyWALL USG 300 User's Guide 331