ZyXEL ZyWALL USG 300 User Guide - Page 340

Chapter 13 Interfaces Figure 282 Network > Interface > WLAN > MAC Filter The following table describes the labels in this screen. Table 75 Configuration > Network > Interface > WLAN > MAC Filter LABEL DESCRIPTION Enable MAC Filter Select or clear the check box to enable or disable MAC address filtering. Enable MAC address filtering to have the router allow or deny access to wireless stations based on MAC addresses. Disable MAC address filtering to have the router not perform MAC filtering on the wireless stations. Association Define the filter action for the list of MAC addresses in the MAC address filter table. Add Edit Remove # MAC Address Description Apply Reset Select Deny to block access to the router, MAC addresses not listed will be allowed to access the router. Select Allow to permit access to the router, MAC addresses not listed will be denied access to the router. Click this to add an entry to the table. Double-click an entry or select it and click Edit to be able to modify the entry's settings. To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it before doing so. This is the index number of the MAC address. This displays the MAC address (in XX:XX:XX:XX:XX:XX format) of the wireless station that is allowed or denied access to the ZyWALL. Enter the MAC address (in XX:XX:XX:XX:XX:XX or XX-XX-XX-XX-XX-XX format) of the wireless station that is to be allowed or denied access to the ZyWALL. Note that if you enter the MAC address using hyphens for the separators, the ZyWALL automatically converts them to colons. This field displays a descriptive name for the MAC address entry. Enter a descriptive name for the MAC address entry. Click Apply to save your changes back to the ZyWALL. Click Reset to return the screen to its last-saved settings. 340 ZyWALL USG 300 User's Guide