eMachines EL1358G eMachines EL1358 Service Guide - Page 40
Removing the Memory Modules, Removing the Power Supply Unit
View all eMachines EL1358G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Removing the Memory Modules 1. Open the holding clips (a) securing the memory modules. 2. Gently pull the DIMM upward to pull it away from the chassis (b). Removing the Power Supply Unit 1. Disconnect the 4-pin and the 24-pin ATX power supply cables from its mainboard connector. a. Squeeze on the retaining latch (a) attached to the cable end of the connector. b. Grasp the cable end of the connector and pull it straight up (b). 32 EL1358 Service Guide
32
EL1358 Service Guide
Removing the Memory Modules
1.
Open the holding clips (
a
) securing the memory modules.
2.
Gently pull the DIMM upward to pull it away from the chassis (
b
).
Removing the Power Supply Unit
1.
Disconnect the 4-pin and the 24-pin ATX power supply cables from its mainboard connector.
a.
Squeeze on the retaining latch (
a
) attached to the cable end of the connector.
b.
Grasp the cable end of the connector and pull it straight up (
b
).