2012 Acura RDX Owner's Manual - Page 248

Playing Discs (Models with navigation system) Loading Discs To load multiple discs in one operation: 1. Press and hold the LOAD button on the changer unit until you hear a beep. You will see ''BUSY'' on the upper display, and the disc load indicator turns red and starts blinking. 2. Insert the disc into the disc slot when the disc load indicator turns green and ''LOAD'' appears in the upper display at the same time. Insert it only halfway; the drive will pull it in the rest of the way. You will see ''BUSY'' on the upper display, and the disc load indicator turns red again and blinks as the CD is loaded. 3. When the disc load indicator turns green and ''LOAD'' appears on the upper display again, insert the next CD in the slot. Do not try to insert a disc until ''LOAD'' appears. You could damage the audio unit. 4. Repeat steps 1 through 3 until all six positions are loaded. If you are not loading all six positions, press the LOAD button again after the last CD has loaded. ''DISC READ'' appears on the upper display, then the system begins playing the last loaded. If you stop loading discs before all six positions are filled, the system will wait for 10 seconds, stop the load operation, and begin playing the last disc loaded. To load a single disc: 1. Press and release the LOAD button on the changer unit. You will see ''BUSY'' on the upper display, and the disc load indicator turns red and starts blinking. Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. 242