2012 Acura RDX Owner's Manual - Page 73

Instrument Panel Indicators U.S. Canada Parking Brake and Brake System Indicator (Red) This indicator has two functions: 1. It comes on when you turn the ignition switch to the ON (II) position. It is a reminder to check the parking brake. Driving with the parking brake not fully released can damage the brakes and tires. If you drive without releasing the parking brake, a beeper will sound, and you will also see a ''RELEASE PARKING BRAKE'' message on the multi-information display (see page 79). 2. If it stays on after you have fully released the parking brake while the engine is running, or if it comes on while driving, it can indicate a problem in the brake system. You will also see a ''BRAKE FLUID LOW'' or ''CHECK BRAKE SYSTEM'' message on the multi-information display. For more information, see page 467. U.S. Canada Brake System Indicator (Amber) The brake system indicator (amber) normally comes on when you turn the ignition switch to the ON (II) position and goes off after the engine starts. If it comes on at any other time, there is a problem in the brake system including the electric vacuum pump. If this happens, have your vehicle checked by your dealer. For more information, see page 468. You will also see a ''CHECK BRAKE SYSTEM'' message on the multiinformation display (see page 79). Instruments and Controls CONTINUED 67