2012 Acura RDX Owner's Manual - Page 447

Wiper Blades BLADE TABS BLADE REINFORCEMENT 3. Remove the blade from the blade assembly: ● Find two tabs with a ''SET'' and '' '' mark on the wiper blade assembly. The opposite side of the '' '' mark is the direction you pull out the wiper blade. Pull out the blade by grabbing the end of it as shown in the above illustration. 4. Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade. 5. Install the new blade onto the blade assembly: ● Maintenance Find two tabs with a ''SET'' and '' '' mark on the wiper blade assembly. This is the direction you install. Slide the blade onto the assembly until it is locked by the tabs. ● ● CONTINUED 441