2012 Acura RDX Owner's Manual - Page 58
2012 Acura RDX Manual
Page 58 highlights
Installing a Child Seat 2. (Outer seating position) After properly securing the child seat (see page 50), lift the head restraint, then route the tether strap over the seat-back and through the head restraint legs. (Rear center seating position) Remove the head restraint (see page 136). Make sure the removed head restraint is secured in the cargo area. Reinstall the head restraint when the child seat is removed. After properly securing the child seat (see page 50), route the tether strap over the top of the seat-back. When you install the child seat in the rear center seating position, you cannot use the seat belt behind the driver's seat. TETHER STRAP TETHER STRAP HOOK ANCHOR 1. Remove the cargo area cover, and place it on the cargo area floor (see page 160). 3. Attach the tether strap hook to the anchor, making sure the tether strap is not twisted. 4. Tighten the strap according to the seat maker's instructions. If the tether strap is too long and cannot be tightened firmly, find a route where the strap can be tightened securely. 52