2006 BMW X5 Owner's Manual - Page 62
2006 BMW X5 Manual
Page 62 highlights
62nIgnition lock Automatic transmission: Only move the selector lever from position P with the engine running. To turn the key back to position 0 or to remove it, first place the selector lever in position P: interlock.< Starting engine Before starting > Engage the handbrake > Be sure that the gearshift lever is in Neutral or the selector lever in Park if the vehicle is equipped with an automatic transmission > Depress the clutch. If the clutch is not depressed, the engine cannot be started > Press the footbrake with an automatic transmission. Do not run the engine in closed rooms, otherwise the inhalation of toxic exhaust gases can cause unconsciousness and death. The exhaust gases contain carbon monoxide, an odorless and colorless, but highly toxic gas. Never leave an unattended vehicle with the engine running, as such a vehicle represents a potential safety hazard. To prevent the vehicle from rolling, always select neutral or the position P and engage the handbrake before leaving the vehicle with the engine running.< When starting the engine, do not press the accelerator pedal. 390de010 Steering lock disengaged Slightly moving the steering often makes it easier to turn the key from 0 to 1. Individual electrical devices are ready for operation. Ignition key positions 0 Steering lock engaged 1 Steering lock disengaged 2 Ignition on 3 Starting engine Starting engine Manual transmission: Depress the clutch when starting the engine. If you do not, a lock prevents the engine from starting.< Steering lock engaged The key can only be inserted or removed in this position. After removing the key, turn the steering wheel slightly to the left or right until you hear the lock engage. If the key is not removed, an acoustic signal sounds after the driver's door is opened. Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG