2006 BMW X5 Owner's Manual - Page 77

Check Control 77n 390de121 530de254 Graphic display* The following alerts or status messages are displayed with icons as of ignition key position 2 until the defects are corrected: 1 Check low beams 2 Add washer fluid, goes out after approx. 1 minute 3 Door open 4 Tailgate open 5 Check brake and tail lamps. A defective center brake lamp is indicated by the upper symbol. When you open the door after stopping, a warning signal sounds without a visual indicator for: > LIGHTS ON > KEY IN IGNITION LOCK. Alphanumeric display* Text messages are used to alert the driver to system malfunctions as of ignition key position 2. The alert is accompanied by an acoustic signal. 1 Status messages symbol 2 Display 3 CHECK button Messages concerning system defects are differentiated based on two priorities: Priority 1 These defects are immediately indicated by an acoustic signal and a flashing warning symbol 1. Simultaneous defects will be displayed consecutively. These status messages remain on the display until the defects are corrected. They cannot be deleted by pressing the CHECK button 3: > RELEASE PARKINGBRAKE > COOLANT TEMPERATURE Temperature too high. Stop the vehicle immediately and switch off the engine, refer to pages 76 and 154 > STOP! ENGINE OILPRESS Oil pressure too low. Stop the vehicle immediately and switch off the engine, refer to pages 19 and 152 Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG Index Data Repairs Maintenance Controls Overview