2006 BMW X5 Owner's Manual - Page 89
2006 BMW X5 Manual
Page 89 highlights
Computer* in MID After three incorrect code entries, or three attempts to start the engine without a code entry, the alarm will sound for 30 seconds on vehicles fitted with an alarm system. Deactivating the alarm in an emergency: 530de228 89n To have all the available information displayed, press > the button on the lever until PROG shows on the display > the SET button. To obtain individual items of information, briefly press the button as often as necessary. If you have forgotten the code, proceed as follows: 1. Disconnect the battery, wait approx. 2 minutes, then reconnect it. Note that on vehicles with an alarm system, the alarm will sound 2. Set the ignition key to position 1: the time display will count down for the next ten minutes 3. After ten minutes, start the engine. If the code becomes available again in the meantime, it can be entered during the waiting period after pressing the CODE button.< Remote control The computer button on the turn signal lever can be used to select the items of computer information to be displayed. To do this, press: > the button on the lever until PROG shows on the display > the MID buttons in the order in which you wish the information to be displayed. Each time an entry is stored, the program number appears on the display. To terminate the selection procedure: Press the right side of the button. Index Online Edition for Part No. 01 41 0 159 867 - © 07/05 BMW AG Data Repairs Maintenance Controls Overview