2009 BMW M3 Owner's Manual - Page 217

3. Push the wire bracket out of the anchor towards the right and fold it up. Tail lamps > Turn signal: PY21W bulb, 21 watts > Brake lamp in the luggage compartment lid: H21W bulb, 21 watts > Other bulbs: W16W bulb, 16 watts The tail lamps are divided in two parts. One part is in the luggage compartment lid, the other is in the fender. 5. Insert the bulb. 6. Fold the wire bracket down and engage it. 7. Reattach the cover. Turn signals, front The turn signal bulb can be changed via a cover in the wheel arch. 1 2 3 4 5 6 Turn signal Roadside parking lamp/tail lamp, LED Backup lamp Brake lamp, consisting of two individual bulbs Brake force display Roadside parking lamp/tail lamp, LED Navigation Reference Mobility Communications Entertainment PY24W Silver Vision bulb, 24 watts 1. Turn the respective wheel inwards. 2. Using a coin, turn both locks of the cover all the way to the left, arrows 1, and remove the cover. 3. Turn the bulb holder to the left, arrow 2, and take it out. 4. Turn the bulb socket in the bulb holder to the right for removal and replacement. 5. Insert the bulb holder and lock it by turning it to the right. 6. Attach the cover by positioning the bottom edge first and then turning both locks all the way to the right using a coin. If the bulbs 2 and 6 malfunction, please contact your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel. Fender-mounted lamps Coupe 1. Left-hand side: use a screwdriver to pry off the cover in the cargo bay and remove the cover. Right-hand side: remove the cover from the right-hand side panel of the cargo bay. 2. Loosen the bulb holder at the clip, see arrow, and pull out. 215 Online Edition for Part no. 01 41 2 600 999 - © 08/08 BMW AG Driving tips 4. Disconnect the plug, change the bulb and reconnect the plug. Controls At a glance