2009 BMW M3 Owner's Manual - Page 48

Adjustments To switch off: Press button longer. If you continue driving within approx. 15 minutes, the seat heating is automatically activated at the previously set temperature. The temperature is lowered or the heating is switched off entirely to save on battery power. The LEDs stay lit. Convenient entry The convenient entry feature includes a memory function for the longitudinal adjustment and backrest angle. 1. Pull lever 1 and swing the backrest forward. 2. Press the front end 2 of the switch until the seat has moved into the desired position. Seat and mirror memory You can store and call up two different combinations of driver's-seat and exterior-mirror positions. Settings for the backrest width and lumbar support are not stored in memory. Previous position Press the rear end 3 of the switch until the seat automatically stops in its previous position, and fold the backrest back. If you release the switch before the previous seat position is reached, the seat will stop at its current position. When sliding the seat backward, make sure no one is injured and no objects are damaged. Before driving off, engage both seats and backrests so that they are locked in place. Otherwise there is a risk of accident due to an unexpected movement.< Storing 1. Switch on radio readiness or the ignition, refer to page 55. 2. Adjust the seat and exterior mirrors to the desired positions. 3. Press the button. The LED in the button lights up. 4. Press the desired memory button 1 or 2: the LED goes out. The driver's seat and exterior mirror positions are stored for the remote control currently in use. Heated seats* Call-up Do not call up memory while you are driving, otherwise unexpected seat movement could result in an accident.< Press once for each temperature level. Three LEDs indicate the highest temperature. 46 Online Edition for Part no. 01 41 2 600 999 - © 08/08 BMW AG