2000 Cadillac Escalade Owner's Manual - Page 295

Bulb Replacement The following procedure tells you how to replace your headlamp bulbs. For the type of bulb to use, see "Replacement Bulbs"in the Index. For any bulbs not listed in this section, contact your service department. 2. Remove the two turn signal bulb sockets and the sidemarker bulb socket from the parking/turn signal assembly by turning counterclockwise. 3. Set the parking/turn signal assembly to the side. Halogen Bulbs CAUTION: Halogen bulbs have pressurized gas inside and can burst if you drop or scratch the bulb. You or others could be injured. Be sure to read and follow the instructions on the bulb package. Headlamps 1. Remove the parking/turn signal assembly as described under "Parking/Turn Signal Lamps," following this procedure. The parking/turn signal assembly must be removed to provide clearance for headlamp removal. 4. Remove the two bolts at the top of the radiator support as shown. 5. Pull the headlamp assembly out. 6-33