2000 Cadillac Escalade Owner's Manual - Page 86

Lockout Prevention With this feature, the power door locks will not lock when the key is in the ignition in the OFF position and a door is open. Programmable Modes Your vehicle can be programmed to one of the following modes. Mode 1: Lockout Prevention Disabled (Doors will lock/unlock when you press the power door lock switch). Mode 2: Lockout Prevention Enabled Your vehicle comes with this feature set in Mode 2. To change the mode: 1. Press the power lock switch on the door. 2. Count the number of chimes you hear. The number of chimes tells you which mode your vehicle is set for. 3. Press the LOCK switch on the door until you hear the number of chimes that correspond to the mode selection you want. The mode you select is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. Keyless Entry Verification This means that when you use the keyless entry transmitter to lock/unlock your vehicle, your headlamps and parking lamps will flash briefly when you press LOCK once. Your horn will sound briefly and your headlamps and parking lamps will flash briefly when you press LOCK a second time. Your headlamps and parking lamps will flash briefly when you press UNLOCK. Programming Modes Your vehicle can be programmed to one of the following modes. Mode 1: All Off (The headlamps will not flash and the horn will not sound to provide you feedback that a lock/unlock command has been received by the keyless entry transmitter.) Mode 2: Horn and Lamps/Lamps (Your horn will sound briefly and your headlamps and parking lamps will flash when you press LOCK on the keyless entry transmitter. Only your headlamps and parking lamps will flash when you press UNLOCK.) Mode 3: Horn and Lamps (Your horn will sound briefly and your headlamps and parking lamps will flash every time you push LOCK or UNLOCK.) 2-18