2000 Cadillac Escalade Owner's Manual - Page 88

To change the mode: 1. Press the UNLOCK switch on the door. 2. Count the number of chimes you hear. The number of chimes tells you which mode your vehicle is set for. 3. Press the UNLOCK switch on the door until you hear the number of chimes that correspond to the mode selection you want. The mode you select is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. Mode 2: Horn and Lamps (Your headlamps and parking lamps will flash and your horn will chirp twice to verify the system is armed using any arming method.) Headlamps and parking lamps only will flash when disarming. Mode 3: Horn and Lamps/Lamps (If you use the keyless entry transmitter to arm the system, your headlamps and parking lamps will flash and your horn will chirp twice to verify that the system is armed. If you use either the power door lock switch or passive arming, only your headlamps and parking lamps will flash for verification.) The headlamps and parking lamps will flash only when disarming. Mode 4: Lamps (When your vehicle arms, only your headlamps and parking lamps will flash for verification.) The headlamps and parking lamps will flash only when disarming. Your vehicle comes with this feature set in Mode 3. To change the mode: 1. Press the LOCK button on the keyless entry transmitter. 2. Count the number of chimes you hear. The number of chimes tells you which mode your vehicle is set for. Theft-Deterrent Arming Verification This feature allows you to change horn and exterior lamp verification when arming and disarming the system. Programmable Modes Your vehicle can be programmed to one of the following modes. Mode 1: All Off (No horn chirps or headlamps and parking lamps will flash.) 2-20