2000 Cadillac Escalade Owner's Manual - Page 85

Driver's Door Alarm Delay The alarm will sound eight seconds after the driver's door is opened with your key. 3. Turn the ignition to OFF. 4. Remove fuse 17. This fuse is in the main fuse block, located on the left side of your instrument panel. When the main fuse block is open, the RADIO fuse (Fuse 17) is located in the lower right corner side of the fuse panel. See "Fuses and Circuit Breakers" in the Index. 5. Turn the ignition to ACCESSORY. You can now program your choices. After programming a feature, you can exit the programming mode at anytime. You should hear two chimes to verify that the system is in programming mode. You will also be able to set Lockout Prevention, Keyless Entry Verification, Arming Method and Arming Verification. Feature Customization Your vehicle's locks and lighting systems can be programmed with several different features. The following list tells you the features that can be programmed. D D D D Lockout Prevention Keyless Entry Verification Theft-Deterrent Arming Method Theft-Deterrent Arming Verification To program features, your vehicle must be in the programming mode. Follow these steps: 1. Put your key in the ignition. 2. Turn the ignition to RUN to disarm the theft-deterrent system. 2-17