2000 Cadillac Escalade Owner's Manual - Page 296

12. Install the parking/turn signal assembly. Install and tighten the two screws. Parking/Turn Signal Lamps 6. Turn the bulb counterclockwise and remove it. 7. Unplug the electrical connector. 8. Put the new bulb into the assembly and turn it clockwise until it is tight. 9. Plug in the electrical connector. 10. Put the headlamp assembly back into the vehicle. Install and tighten the two bolts. 11. Install the two turn signal bulb sockets and the sidemarker bulb socket into the parking/turn signal bulb assembly. 1. Remove the two screws on the side of the parking/turn signal bulb assembly. 2. Pull the parking/turn signal assembly toward the side of the vehicle until the tabs are out of the grille. 6-34