2000 Chevrolet Impala Owner's Manual - Page 142

yellowblue Manual Compass Calibration If the compass appears erratic and the calibration symbol does not appear, you must manually put the compass into the calibration mode. Turn the ignition on and cycle the DIC to the Compass/Temperature mode. Press the RESET button for at least 10 seconds until the calibration symbol appears and all segments of the compass display are illuminated. Release the button and complete three 360_ turns in an area free from large metal objects. The calibration symbol will turn off and the compass reading will be displayed. Error Displays Trip Computer There are five trip computer displays which may be stepped through by pushing the MODE button. The information will appear in the following order: D AVG ECON (Average Fuel Economy): This shows the average fuel economy since the last reset. D INST ECON (Instantaneous Fuel Economy): This shows fuel economy for the most recent second of driving. distance that can be traveled with the remaining fuel. The fuel economy used to calculate range is based on the last few hours of driving. accumulated fuel used since the last reset. average speed since the last reset. D RANGE (Trip Range): This shows the estimated D An error of the vehicle's speed sensor or fuel sender will cause "-E-" to be displayed. D In the absence of vehicle communications, a double dash "--" is displayed. If one of these error messages appear, see your dealer. D FUEL USED (Trip Fuel Used): This shows the D AVG SPEED (Average Speed): This shows the Resetting the Trip Computer Press and hold the RESET button for at least two seconds. The reset is acknowledged with the display showing all segments on for a period of half a second. A reset can only be done in AVG ECON, FUEL USED and AVG SPEED displays. 2-79