2000 Chevrolet Impala Owner's Manual - Page 298

yellowblue 10. Install the assembly and the two lower wing nuts. 11. Reinstall the carpeting. 12. Reinstall the upper (convenience net) wing nut and convenience net, if equipped. 7. Reinstall the socket in the assembly. Tighten the socket by turning it clockwise. 8. Reinstall the applique and the nine wing nuts. Rear Courtesy Lamps 1. Remove the two access covers from the assist handle assembly using a small coin. 2. Remove the old bulb from the small prongs extending from the dome lamp base plate; hook the new bulb onto the prongs. 3. Remove the two screws with a E8 TORXR socket. 4. Pull the assist handle assembly out and remove the old bulb. 5. Reverse Steps 1 through 3 to reassemble. Back-Up Lamp 1. Open the trunk. The back-up lamp bulbs are in the rear of the trunk lid. 2. Remove the nine wing nuts. 3. Pull the rear applique away from the vehicle. 4. To remove a socket press the tab, turn the socket counterclockwise and pull it out. 5. Pull the bulb out. Do not twist it. 6. Push the new bulb into the socket. 6-41