2011 Chevrolet Express 1500 Cargo Owner's Manual - Page 309

Vehicle Care 7. Install the new bulb into the headlamp assembly and connect the electrical connector. 8. Reverse the steps to reinstall the headlamp assembly. To prevent headlamp vibration and shortened bulb life, be sure to insert the headlamp assembly tabs in the slots at the lower portion of the housing. 10-39 Sealed‐Beam Headlamp A. Headlamp retainer screws B. Headlamp retainer C. Sealed‐beam headlamp bulb 1. Remove the four screws (A) from the headlamp retainer (B). Pull the retainer (B) out and set it aside. 2. Pull the bulb (C) forward to gain access to the electrical connector. 3. Disconnect the electrical connector (B) and remove the headlamp bulb (A). 4. Reverse Steps 1 through 3 to reinstall the headlamp.