2010 Chrysler Sebring Owner Manual - Page 153

152 UNDERSTANDING YOUR INSTRUMENT PANEL Dual Trip Odometer - If Equipped 15. Cruise Indicator - If Equipped This indicator shows that the Electronic Speed Press and release this button to change the display from odometer to "Trip A." Press and release it a second time Control System is ON. to change the display to "Trip B." Press and release it a 16. Odometer/Trip Odometer Reset Button third time to change the display back to the odometer. Single Trip Odometer To reset the trip odometer, first display the trip mileage Press and release this button to change the display from that you want to reset, "Trip A" or "Trip B." Then push odometer to trip odometer. The word "Trip" displays to and hold the button (approximately 2 seconds) until the show that the odometer is in Trip Mode. Press and release display resets to 0 miles (km). The odometer must be in the button again to change the display back to the Trip Mode to reset the trip odometer. odometer. 17. Electronic Throttle Control (ETC) Indicator Light To reset the trip odometer, first set the display to Trip This light informs you of a problem with the Mode. Then push and hold the button (approximately Electronic Throttle Control (ETC) system. If a 2 seconds) until the display resets to 0 miles (km). The problem is detected, the light will come on odometer must be in Trip Mode to reset the trip odomwhile the engine is running. If the light remains eter. lit with the engine running, your vehicle will usually be drivable and not need towing, however see your authorized dealer for service as soon as possible.