2010 Chrysler Sebring Owner Manual - Page 249

248 STARTING AND OPERATING damage, the transmission automatically shifts into second gear (third gear for six-speed). The transmission remains in second gear (third gear for six-speed) despite the forward gear selected. PARK, REVERSE, and NEUTRAL will continue to operate. The Reset feature allows the vehicle to be driven to a dealer for service without damaging the transmission. NOTE: Even if the transmission can be reset, it is recommended that you visit a dealer at your earliest possible convenience. Your dealer has diagnostic equipment to determine if the problem could recur. If the transmission cannot be reset, dealer service is required. In the event of a momentary problem, the transmission AUTOSTICKா - IF EQUIPPED can be reset to regain all forward gears by performing the AutoStick௡ is a driver-interactive transmission that offers six manual ratio changes to provide you with more following steps: control. AutoStick௡ allows you to maximize engine brak1. Stop the vehicle. ing, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system can 2. Shift the shift lever into PARK. also provide you with more control during passing, city 3. Turn the ignition switch to the LOCK position. driving, cold slippery conditions, mountain driving, trailer towing, and many other situations. 4. Restart the engine. 5. Shift the shift lever into the desired gear range and Operation By placing the shift lever one shift-level below the DRIVE resume driving. position, it can be moved from side to side. This allows