2010 Chrysler Sebring Owner Manual - Page 32
2010 Chrysler Sebring Manual
Page 32 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 Auto Unlock On Exit The doors will unlock automatically on vehicles with power door locks if: Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. 1. The Automatic Unlock Doors on Exit feature is en- • For vehicles not equipped with the EVIC, perform the abled. following procedure: 2. The transmission was in gear and the vehicle speed 1. Close all doors and place the key in the ignition. returned to 0 mph (0 km/h). 2. Cycle the ignition switch between LOCK and ON and 3. The transmission is in NEUTRAL or PARK. then back to LOCK four times, ending up in the LOCK position. 4. The driver door is opened. 5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). 3. Press the power door unlock switch to unlock the doors. 2 4. A single chime will indicate the completion of the Auto Unlock On Exit Programming programming. The Automatic Unlock Doors on Exit feature can be 5. Repeat these steps if you want to return this feature to enabled or disabled as follows: its previous setting. • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to "Electronic Vehicle