2013 Chrysler Town & Country Owner's Manual - Page 220

218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Once programmed, all RKE transmitters linked to memory can be easily enabled or disabled at one time. Refer to "Electronic Vehicle Information Center (EVIC)/ Customer-Programmable FeaturesЉ in "Understanding • Your Instrument Panel" for further information. Easy Entry/Exit Seat (Available With Memory Seat ONLY) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position. When you remove the key from the ignition switch the driver seat will move to a position 0.3 in (7.7 mm) forward of the rear stop if the driver seat position is between 0.9 - 2.7 in (22.7 - 67.7 mm) forward of the rear stop. The seat will return to its previously set position when you insert the key into the ignition switch and turn it out of the LOCK position. The distance the driver seat moves depends on where • The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 in (22.7 mm) you have the driver seat positioned when you remove the forward of the rear stop. At this position, there is no key from the ignition switch. benefit to the driver by moving the seat for Easy Exit • When you remove the key from the ignition switch, or Easy Entry. the driver seat will move about 2.4 in (60 mm) rearward if the driver seat position is greater than or equal Each stored memory setting will have an associated Easy Entry and Easy Exit Position. to 2.7 in (67.7 mm) forward of the rear stop. The seat