2008 Dodge Viper Owner Manual - Page 182

WHAT TO DO IN EMERGENCIES 181 6. Air Pump Hose (Black) 7. Sealant Hose (Clear with Yellow Cap) Using the Mode Select Knob & Hoses Selecting Air Mode Turn the Mode Select knob (4) to this position for air pump operation only. Use the Black Air Pump Hose (6) when selecting this mode. Selecting Sealant/Air Mode Turn the Mode Select knob (4) to this position to inject the TIREFIT Sealant and to inflate the tire. Use the Sealant Hose (Clear hose with the Yellow Cap) (7) when selecting this mode. Using the Air Pump Power Button Push and release the button (3) once to turn On the TIREFIT kit. Push and release the button (3) again to turn Off the TIREFIT kit. Sealing a Tire with TIREFIT (A) Whenever You Stop to Use TIREFIT: Turn on the vehicle's hazard warning flashers. 1. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground. This will allow the TIREFIT Hoses (6) and (7) to reach the valve stem and keep the TIREFIT kit flat on the ground. This will provide the best positioning of the kit when injecting the sealant into the deflated tire and running the air pump. Move the vehicle as necessary to place the valve stem in this position before proceeding. 2. Place the transmission in Park (auto transmission) or in Gear (manual transmission) and turn off the ignition. 3. Set the parking brake. 6