2008 Dodge Viper Owner Manual - Page 29

28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE - COUPE MODELS ONLY The liftgate can be unlocked or locked by the Remote Keyless Entry (RKE) transmitter or by activating either of the power door lock switches located on the door trim panels. To unlock the liftgate with the RKE transmitter, press the LIFTGATE button on the transmitter for at least one second. The park lights and turn signal lights will flash three times to acknowledge the signal. NOTE: Pressing the UNLOCK button on the transmitter will also allow liftgate access. Once unlocked, the liftgate can be opened or closed. To open the liftgate, depress the liftgate release switch located in the exterior liftgate handle and pull the liftgate open with one fluid motion. NOTE: The liftgate release switch will be ignored under the following conditions: • When the ignition is in RUN and the parking brake is not set. • When vehicle speed is not a 0 mph (0 km/h). • When all doors are locked (except for RKE liftgate access). Refer to "Entering the liftgate with the System Armed - Coupe" under "Security Alarm System" in this section for additional information. The word "DECK" will flash in the odometer when the liftgate is open. With the key in the ignition switch, this display will turn off approximately 40 seconds after switching off the ignition, or if the Power Accessory Delay feature is active, it will turn off approximately 40 seconds after the delay feature times out.