2008 Dodge Viper Owner Manual - Page 186
2008 Dodge Viper Manual
Page 186 highlights
WHAT TO DO IN EMERGENCIES 185 5. Place the TIREFIT kit in its proper storage area in the vehicle. 6. Have the tire inspected and repaired or replaced at the earliest opportunity at an authorized dealer or tire service center. 7. Replace the Sealant Bottle (1) at your nearest authorized Mopar parts dealership as soon as possible. (G) Distributing TIREFIT Sealant to Better Enable Tire Inflation NOTE: Use this procedure only if directed here from Step 1 of "(D) After Injecting TIREFIT Sealant." Press the Air Pump Power Button (3) to turn off the TIREFIT kit. Then, disconnect the kit from the valve stem and place it in the vehicle. 1. Drive the vehicle forward approximately 30 to 50 feet (9 to 15 m) to distribute the sealant more evenly within the tire. 2. Return to Step 1 of "(D) After Injecting TIREFIT Sealant" and attempt to inflate the tire. However, this time, if the tire fails to inflate to 26 psi (1.8 bar) within 15 minutes, the tire is too badly damaged. Do not attempt to drive the vehicle further. Call for assistance. 6