2010 Dodge Dakota Extended Cab Owner Manual - Page 141
2010 Dodge Dakota Extended Cab Manual
Page 141 highlights
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tapping the ACCEL button once will result in a speed To Accelerate for Passing increase of 1 mph (2 km/h). Each time the button is Press the accelerator as you would normally. When the tapped, speed increases so that tapping the button three pedal is released, the vehicle will return to the set speed. times will increase speed by 3 mph (4.8 km/h). NOTE: When driving uphill, at elevations above 2,000 ft Tapping the DECEL button once will result in a speed (610 m), or when the vehicle is heavily loaded (especially decrease of 1 mph (2 km/h). Each time the button is when towing) the vehicle may slow below the SET speed. tapped, speed will decrease. For example, tapping the If the vehicle speed drops below 25 mph (40 km/h), the button three times will decrease the speed by 3 mph Electronic Speed Control will automatically disengage. If this happens, you can push down on the accelerator (4.8 km/h). pedal to maintain the desired speed. To decrease the speed while the Electronic Speed Control is on, press and hold the DECEL button. Release the Vehicles equipped with an automatic transmission may button when the desired speed is reached, and the new exhibit several downshifts under the above conditions. To reduce the frequency of the downshifts and to imspeed will be set. prove vehicle performance, it is advisable to lock out OVERDRIVE by pressing the TOW/HAUL button located at the end of the shift lever.
![](/manual_guide/autos/Dodge-2010-Dakota-Owner-Manual-3689c8/141.png)