2010 Dodge Dakota Extended Cab Owner Manual - Page 33

32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Unlock On Exit Feature - If Equipped This feature unlocks all of the doors of the vehicle when any door is opened. This will occur only after the vehicle has been shifted into the PARK position after the vehicle has been driven (shifted out of PARK and the doors closed). 4. Within 15 seconds, cycle the key from the LOCK position to the ON position and back to LOCK position, a minimum of four times; ending in the LOCK position. (Do not start the engine.) 5. Within 30 seconds, press the driver's door LOCK switch in the UNLOCK direction. Auto Unlock Feature Programming 6. A single chime will sound to indicate the feature has The Customer Programming sequence to disable or enbeen changed. able Auto Unlock: 7. To reactivate the feature, repeat the above steps. 1. Enter your vehicle and close all the doors. 8. If a chime is not heard, program mode was canceled 2. Fasten your seat belt. (Fastening the seat belt will before the feature could be changed. If necessary, repeat cancel any chiming that may be confusing during this the above procedure. programming procedure.) 3. Insert the key into the ignition.