2011 Dodge Journey Owner Manual - Page 278

276 UNDERSTANDING YOUR INSTRUMENT PANEL turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance), perform the following procedure: 1. Without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/ • Average Fuel Economy/Fuel Saver Mode RUN position (Do not start the engine.) • Distance To Empty (DTE) 2. Fully depress the accelerator pedal, slowly, three times • Miles Per Gallon (MPG) within 10 seconds. Average Fuel Economy / ECO Fuel Saver Mode - 3. Without pressing the brake pedal, push the ENGINE If Equipped START/STOP button once to return the ignition to the Shows the average fuel economy since the last reset. OFF/LOCK position. When the fuel economy is reset, the display will read NOTE: If the indicator message illuminates when you "RESET" or show dashes for two seconds. Then, the start the vehicle, the oil change indicator system did not history information will be erased, and the averaging will continue from the last fuel average reading before the reset. If necessary, repeat this procedure. reset. Fuel Economy Press and release the UP or DOWN button until "Fuel Economy" displays highlighted in the EVIC and press the SELECT button. The following Fuel Economy functions will display in the EVIC: