2011 Dodge Journey Owner Manual - Page 61

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 BeltAlert௡ will chime as a single notification and illumi- The BeltAlert௡ can be enabled or disabled by your nate the Seat Belt Reminder Light, then will proceed to authorized dealer or by performing the following steps: the 96 second reminder sequence. NOTE: The following steps must occur within the first The front passenger seat BeltAlert௡ is not active when the 60 seconds of the ignition being cycled to the ON/RUN front passenger seat is unoccupied. BeltAlert௡ may be position. triggered when an animal or heavy object is on the front 1. With all doors closed, and the ignition in any position passenger seat or when the seat is folded flat (if except ON/RUN, buckle the driver's seat belt. equipped). It is recommended that pets be restrained in the rear seat in pet harnesses or pet carriers that are 2. Cycle the ignition to the ON/RUN position, (do not start the engine). Wait for the Seat Belt Reminder Light to secured by seat belts, and cargo is properly stowed. turn off and then proceed to the next step. BeltAlert௡ Programming 3. Unbuckle the driver's seat belt, allow the seat belt to NOTE: Chrysler Group LLC does not recommend deretract, and then re-buckle the driver's seat belt at least activating the BeltAlert௡. three times, ending with the seat belt buckled. NOTE: Watch for the Seat Belt Reminder Light to turn on while the seat belt retracts and turn off while rebuckling the seat belt. It may be necessary to completely retract the seat belt each time. 2