2012 Dodge Avenger Owner Manual - Page 20

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your authorized dealer to have all remaining keys erased from the systems memory. This will prevent the lost key from starting 4. Insert a blank Sentry Key௡ into the ignition switch. your vehicle. The remaining keys must then be reproTurn the ignition switch to the ON/RUN position within grammed. All vehicle keys must be taken to an autho60 seconds. After 10 seconds, a single chime will sound. rized dealer at the time of service to be reprogrammed. In addition, the Vehicle Security Light will stop flashing. General Information To indicate that programming is complete, the Vehicle The Sentry Key௡ system complies with FCC rules part 15 Security Light will turn on again for three seconds and and with RSS-210 of Industry Canada. Operation is then turn off. subject to the following conditions: The new Sentry Key௡ is programmed. The Remote • This device may not cause harmful interference. Keyless Entry (RKE) transmitter will also be pro• This device must accept any interference that may be grammed during this procedure. received, including interference that may cause undesired operation. 3. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. Repeat this procedure to program up to eight keys. If you do not have a programmed Sentry Key௡, contact your authorized dealer for details.