2012 Dodge Avenger Owner Manual - Page 337

STARTING AND OPERATING 335 ESC Activation/Malfunction Indicator Light And ESC OFF Indicator Light The "ESC Activation/Malfunction Indicator Light" in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the "ESC Activation/Malfunction Indicator Light" comes on continuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. Malfunction Indicator Light" begins to flash during acceleration, ease up on the accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. NOTE: • The "ESC Activation/Malfunction Indicator Light" and the "ESC OFF Indicator Light" come on momentarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESC system will be ON even if it was turned off previously. 5 • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive following the maneuver that caused the ESC activation. The "ESC Activation/Malfunction Indicator Light" (located in the instrument cluster) starts to flash as soon as The "ESC OFF Indicator Light" indicates the the tires lose traction and the ESC system becomes active. Electronic Stability Control (ESC) is off. The "ESC Activation/Malfunction Indicator Light" also flashes when TCS is active. If the "ESC Activation/