2012 Dodge Avenger Owner Manual - Page 286
2012 Dodge Avenger Manual
Page 286 highlights
284 UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the system is quite simple. 1. Turn the Mode Control knob (on the right) and the NOTE: Blower Control knob (on the left) to AUTO. • The temperature setting can be adjusted at anytime NOTE: The AUTO position performs best for front seat without affecting automatic operation. occupants only. 2. Dial in the temperature you would • Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the control button like the system to maintain by rotating to flash three times and then turn off. This indicates the Temperature Control knob. Once that the system is in AUTO mode and requesting the the comfort level is selected, the sysair conditioning is not necessary. tem will maintain that level automatically using the heating system. Should • If your air conditioning performance seems lower than the desired comfort level require air expected, check the front of the A/C condenser located conditioning, the system will automatically make the in front of the radiator for an accumulation of dirt or adjustment. insects. Clean with a gentle water spray from behind the radiator and through the condenser. Fabric front You will experience the greatest efficiency by simply fascia protectors may reduce airflow to the condenser, allowing the system to function automatically. Selecting reducing air conditioning performance. the "O" (OFF) position on the blower control stops the system completely and closes the outside air intake. 72°F (22°C) is the recommended setting for maximum comfort for the average person; however, this may vary.