2012 Dodge Durango Owner Manual - Page 198

196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Once programmed, all RKE transmitters linked to memory can be easily enabled or disabled at one time. 1. Turn the ignition switch to the LOCK position, and Refer to "Electronic Vehicle Information Center (EVIC)/ remove the key. Customer-Programmable Features" in "Understanding 2. Press and release MEMORY button number 1. The Your Instrument Panel" for further information. system will recall any memory settings stored in position Easy Entry/Exit Seat 1. Wait for the system to complete the memory recall This feature provides automatic driver's seat positioning before continuing to Step 3. which will enhance driver mobility out of and into the 3. Press and release the memory S (SET) button located vehicle. on the driver's door. There are two possible Easy Entry/Exit adjustments 4. Within five seconds, press and release MEMORY available: button 1 on the driver's door. • The seat cushion will move rearward approximately 2.5 in (60 mm), if the starting position of the seat is 5. Within five seconds, press and release the UNLOCK greater than or equal to 2.67 in (68 mm) forward of the button on the RKE transmitter. rear seat stop when the key is removed from the To disable another RKE transmitter linked to either ignition switch. The seat will then move forward memory position, repeat steps 1 through 5 for each RKE approximately 2.5 in (60 mm) when the key is placed transmitter. into the ignition and turned out of the LOCK position. To Disable A RKE Transmitter Linked To Memory