2012 Dodge Durango Owner Manual - Page 587

STARTING AND OPERATING 585 16. The Keyless Enter-N-Go button (if equipped) may • The ignition switch must be in the ON/RUN position now be reinstalled if desired. Refer to "Starting for a transfer case shift to take place and for the Procedures/Keyless Enter-N-Go" in "Starting and Operposition indicator lights to be operable. If the ignition ating" for further information. switch is not in the ON/RUN position, the shift will not take place and no position indicator lights will be NOTE: on or flashing. • Steps 1 through 5 are requirements that must be met prior to pressing the transfer case NEUTRAL (N) • A flashing NEUTRAL (N) position indicator light indicates that shift requirements have not been met. button and must continue to be met until the shift has been completed. If any of these requirements are not met prior to pressing the NEUTRAL (N) button, or are no longer met during the shift, the NEUTRAL (N) indicator light will flash continuously until all requirements are met or until the NEUTRAL (N) button is released. 5