2012 Dodge Journey Owner Manual - Page 219

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 ParkSense௡ will retain the last system state (enabled or ParkSenseா Warning Display disabled) from the last ignition cycle when the ignition is The ParkSense௡ Warning screen will only be displayed if Sound and Display is selected from the Uconnect changed to the ON/RUN position. Touch™ System. Refer to "Uconnect Touch™ Settings" in ParkSense௡ can be active only when the shift lever is in "Understanding Your Instrument Panel" for further inREVERSE. If ParkSense௡ is enabled at this shift lever formation. position, the system will remain active until the vehicle speed is increased to approximately 7 mph (11 km/h) or The ParkSense௡ Warning screen is located within the above. The system will become active again if the vehicle Electronic Vehicle Information Center (EVIC). It provides speed is decreased to speeds less than approximately visual warnings to indicate the distance between the rear fascia/bumper and the detected obstacle. Refer to "Elec6 mph (9 km/h). tronic Vehicle Information Center (EVIC)/Settings" in ParkSenseா Sensors Understanding Your Instrument Panel" for further The four ParkSense௡ sensors, located in the rear fascia/ information. bumper, monitor the area behind the vehicle that is within the sensors' field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle. 3