2012 Dodge Journey Owner Manual - Page 384

382 STARTING AND OPERATING converter clutch is not engaged, it may seem as if the transmission is not shifting into Overdrive when cold. This is normal. Using the AutoStick௡ feature, when the transmission is sufficiently warm, will demonstrate that the transmission is able to shift into and out of Overdrive. Six-Speed Automatic Transmission - 3.6L Engine The shift lever position display (located in the instrument panel cluster) indicates the transmission gear range. You must press the brake pedal to move the shift lever out of the PARK position (refer to "Brake/Transmission Shift Interlock System" in this section). To drive, move the shift lever from PARK or NEUTRAL to the DRIVE position. The electronically-controlled transmission provides a precise shift schedule. The transmission electronics are self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers). Shifting from DRIVE to PARK or REVERSE should be done only after the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when moving the shift lever between these gears. The transmission shift lever has PARK, REVERSE, NEUTRAL, DRIVE, and AutoStick௡ shift positions. Manual shifts can be made using the AutoStick௡ shift control (refer to "AutoStick௡" in "Starting And Operating" for further information). Moving the shift lever to the left or right (-/+) while in the AutoStick௡ position (below the Drive position) will manually select the transmission gear, and will display the current gear in the instrument cluster as 6, 5, 4, 3, 2, 1.