2012 Dodge Journey Owner Manual - Page 526

524 MAINTAINING YOUR VEHICLE Use only manufacturer's recommended brake fluid. ReMaster Cylinder - Brake Fluid Level Check Check the fluid level in the master cylinder immediately fer to "Fluids, Lubricants, and Genuine Parts" in "Mainif the "Brake Warning Light" indicates system failure. taining Your Vehicle" for further information. Check the fluid level in the master cylinder when performing underhood services. Clean the top of the master cylinder area before removing the cap. If necessary, add fluid to bring the fluid level up to the requirements described on the brake fluid reservoir. Overfilling of fluid is not recommended because it may cause leaking in the system. Fluid level can be expected to fall as the brake pads wear. Brake fluid level should be checked when pads are replaced. However, low fluid level may be caused by a leak and a checkup may be needed. WARNING! • Use only manufacturer's recommended brake fluid. Refer to "Fluids, Lubricants, and Genuine Parts" in "Maintaining Your Vehicle" for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also identified on the original factory installed hydraulic master cylinder reservoir. (Continued)