2012 Dodge Journey Owner Manual - Page 276

274 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of 1. Tachometer an onboard diagnostic system, called OBD, that The red segments indicate the maximum permissible monitors engine and automatic transmission conengine revolutions per minute (RPM x 1000) for each gear trol systems. The light will illuminate when the key is in range. Before reaching the red area, ease up on the the ON/RUN position, before engine start. If the bulb accelerator. does not come on when turning the key from OFF to ON/RUN, have the condition checked promptly. 2. Air Bag Warning Light This light will turn on for four to eight seconds Certain conditions, such as a loose or missing gas cap, as a bulb check when the ignition switch is first poor fuel quality, etc., may illuminate the MIL after turned to ON/RUN. If the light is either not on engine start. The vehicle should be serviced if the light during starting, stays on, or turns on while stays on through several of your typical driving cycles. In driving, have the system inspected at an authorized most situations, the vehicle will drive normally and will dealer as soon as possible. Refer to "Occupant Restraints" not require towing. in "Things To Know Before Starting Your Vehicle" for further information. INSTRUMENT CLUSTER DESCRIPTIONS