2013 Dodge Charger Owner Manual SRT - Page 216

214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Recall Memory with Remote Key Unlock feature 3. Once the profile has been recalled, press and release the SET (S) button on the memory switch, then press can be turned on and off using the Uconnect௡ System, and release the side of the rocker switch labeled 1 or 2 refer to "Uconnect௡ Settings" in "Understanding Your accordingly. "Memory Profile Set" (1 or 2) will display Instrument Panel" for further information. in the instrument cluster on vehicles equipped with Linking And Unlinking The Remote Keyless Entry the EVIC. Transmitter To Memory 4. Press and release the LOCK button on the RKE Your RKE transmitters can be programmed to recall one transmitter within 10 seconds. of two pre-programmed memory profiles by pressing the UNLOCK button on the RKE transmitter. NOTE: Your RKE transmitters can be unlinked to your To program your RKE transmitters, perform the follow- memory settings by pressing the SET (S) button followed by the UNLOCK button on the RKE transmitter in Step 4 ing: above. 1. Remove the Key Fob from the ignition (or change the ignition to OFF, for vehicles equipped with Keyless Memory Position Recall Enter-N-Go). NOTE: The vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not 2. Select desired memory profile 1 or 2. in PARK, a message will display in the EVIC (if equipped).