2013 Dodge Charger Owner Manual SRT - Page 242

240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE erasing the set speed memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set Turn the Electronic Speed Control ON. When the vehicle speed memory. has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will To Resume Speed operate at the selected speed. To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed NOTE: above 20 mph (32 km/h). • The vehicle should be traveling at a steady speed and To Vary The Speed Setting on level ground before pressing the SET button. To Set A Desired Speed • The Electronic Speed Control may not engage if a When the Electronic Speed Control is set, you can indifferent size tire is installed on one wheel, such as the crease speed by pushing the RES (+) button. If the button is continually pressed, the set speed will continue to compact spare tire (if equipped). increase until the button is released, then the new set To Deactivate speed will be established. A soft tap on the brake pedal, pushing the CANCEL Pressing the RES (+) button once will result in a 1 mph button, or normal brake pressure while slowing the (1.6 km/h) increase in set speed. Each subsequent tap of vehicle will deactivate Electronic Speed Control without the button results in an increase of 1 mph (1.6 km/h).